dmesg - 2 x Intel Xeon E5-2667 v2
Linux version 5.19.0-1-default (geeko@buildhost) (gcc (SUSE Linux) 12.1.1 20220721 [revision 4f15d2234608e82159d030dadb17af678cfad626], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.38.20220525-6) #1 SMP PREEMPT_DYNAMIC Tue Aug 9 16:38:40 UTC 2022 (8213b0c)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007de25fff] usable
BIOS-e820: [mem 0x000000007de26000-0x000000007dfe3fff] reserved
BIOS-e820: [mem 0x000000007dfe4000-0x000000007e1e1fff] ACPI NVS
BIOS-e820: [mem 0x000000007e1e2000-0x000000007f35dfff] reserved
BIOS-e820: [mem 0x000000007f35e000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000002c7fffffff] usable
The simpledrm driver will not be probed
The simpledrm driver will not be probed
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro SSG-6047R-E1CR36N/X9DRi-LN4+/X9DR3-LN4+, BIOS 3.4 11/20/2019
tsc: Fast TSC calibration using PIT
tsc: Detected 3299.848 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x2c80000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
last_pfn = 0x7de26 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdbb0-0x000fdbbf]
Using GB pages for direct mapping
RAMDISK: [mem 0x3496d000-0x364adfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
ACPI: XSDT 0x000000007E105088 000094 (v01 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: FACP 0x000000007E10FB30 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: DSDT 0x000000007E1051B8 00A975 (v02 SUPERM SMCI--MB 00000000 INTL 20091112)
ACPI: FACS 0x000000007E1D9080 000040
ACPI: APIC 0x000000007E10FC28 000224 (v03 00000001 AMI 00010013)
ACPI: FPDT 0x000000007E10FE50 000044 (v01 00000001 AMI 00010013)
ACPI: SRAT 0x000000007E10FE98 0004B0 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 0x000000007E110348 000030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 0x000000007E110378 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005)
ACPI: PRAD 0x000000007E1103B0 0000CD (v02 PRADID PRADTID 00000001 MSFT 04000000)
ACPI: SSDT 0x000000007E110480 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112)
ACPI: EINJ 0x000000007E1D7F68 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x000000007E1D8098 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x000000007E1D82C8 00027C (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x000000007E1D8548 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 0x000000007E1D8578 000198 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: MCFG 0x000000007E1D8710 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
ACPI: Reserving FACP table memory at [mem 0x7e10fb30-0x7e10fc23]
ACPI: Reserving DSDT table memory at [mem 0x7e1051b8-0x7e10fb2c]
ACPI: Reserving FACS table memory at [mem 0x7e1d9080-0x7e1d90bf]
ACPI: Reserving APIC table memory at [mem 0x7e10fc28-0x7e10fe4b]
ACPI: Reserving FPDT table memory at [mem 0x7e10fe50-0x7e10fe93]
ACPI: Reserving SRAT table memory at [mem 0x7e10fe98-0x7e110347]
ACPI: Reserving SLIT table memory at [mem 0x7e110348-0x7e110377]
ACPI: Reserving HPET table memory at [mem 0x7e110378-0x7e1103af]
ACPI: Reserving PRAD table memory at [mem 0x7e1103b0-0x7e11047c]
ACPI: Reserving SSDT table memory at [mem 0x7e110480-0x7e1d7f67]
ACPI: Reserving EINJ table memory at [mem 0x7e1d7f68-0x7e1d8097]
ACPI: Reserving ERST table memory at [mem 0x7e1d8098-0x7e1d82c7]
ACPI: Reserving HEST table memory at [mem 0x7e1d82c8-0x7e1d8543]
ACPI: Reserving BERT table memory at [mem 0x7e1d8548-0x7e1d8577]
ACPI: Reserving DMAR table memory at [mem 0x7e1d8578-0x7e1d870f]
ACPI: Reserving MCFG table memory at [mem 0x7e1d8710-0x7e1d874b]
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x147fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x1480000000-0x2c7fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x147fffffff] -> [mem 0x00000000-0x147fffffff]
NODE_DATA(0) allocated [mem 0x147ffd5000-0x147fffffff]
NODE_DATA(1) allocated [mem 0x2c7ffd4000-0x2c7fffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000002c7fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000007de25fff]
node 0: [mem 0x0000000100000000-0x000000147fffffff]
node 1: [mem 0x0000001480000000-0x0000002c7fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000147fffffff]
Initmem setup node 1 [mem 0x0000001480000000-0x0000002c7fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone Normal: 8666 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7de26000-0x7dfe3fff]
PM: hibernation: Registered nosave memory: [mem 0x7dfe4000-0x7e1e1fff]
PM: hibernation: Registered nosave memory: [mem 0x7e1e2000-0x7f35dfff]
PM: hibernation: Registered nosave memory: [mem 0x7f35e000-0x7f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 16 17 18 19 20 21 22 23
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 [1] 24 25 26 27 28 29 30 31
Fallback order for Node 0: 0 1
Fallback order for Node 1: 1 0
Built 2 zonelists, mobility grouping on. Total pages: 45407661
Policy zone: Normal
Unknown kernel command line parameters "showopts BOOT_IMAGE=/boot/vmlinuz-5.19.0-1-default splash=silent", will be passed to user space.
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 1015808 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 2097152 bytes
printk: early log buf free: 248424(94%)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 2229904K/184514316K available (14343K kernel code, 2918K rwdata, 11096K rodata, 2912K init, 6156K bss, 3041488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 44151 entries in 173 pages
ftrace: allocated 173 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1496, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
random: crng init done
Console: colour dummy device 80x25
printk: console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: DRHD base: 0x000000dfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007f22d000 end: 0x0000007f23bfff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000dfffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xdfffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f90bcb2ea8, max_idle_ns: 440795253027 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.69 BogoMIPS (lpj=13199392)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
AppArmor: AppArmor initialized
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes, vmalloc hugepage)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc hugepage)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2667 v2 @ 3.30GHz (family: 0x6, model: 0x3e, stepping: 0x4)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting shift to 5 and lim to 1.
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Estimated ratio of average max frequency by base frequency (times 1024): 1148
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
.... node #1, CPUs: #8
smpboot: CPU 8 Converting physical 0 to logical die 1
#9 #10 #11 #12 #13 #14 #15
.... node #0, CPUs: #16
MDS CPU bug present and SMT on, data leak possible. See for more details.
#17 #18 #19 #20 #21 #22 #23
.... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
smp: Brought up 2 nodes, 32 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 32 processors activated (211262.54 BogoMIPS)
node 0 deferred pages initialised in 272ms
node 1 deferred pages initialised in 452ms
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x7dfe4000-0x7e1e1fff] (2088960 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x7f35e000-0x7f7fffff] (4857856 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, vmalloc)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 07:54:49, date: 2022-08-13
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1660377289.704:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ipmi:dmi: Base address is zero, assuming no IPMI interface
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38ffffffffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0x38fffff1c000-0x38fffff1ffff 64bit]
pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0x38fffff18000-0x38fffff1bfff 64bit]
pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0x38fffff14000-0x38fffff17fff 64bit]
pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0x38fffff10000-0x38fffff13fff 64bit]
pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0x38fffff0c000-0x38fffff0ffff 64bit]
pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0x38fffff08000-0x38fffff0bfff 64bit]
pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0x38fffff04000-0x38fffff07fff 64bit]
pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0x38fffff00000-0x38fffff03fff 64bit]
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xdf204000-0xdf204fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf202000-0xdf2023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf201000-0xdf2013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 0x14: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 0x18: [io 0x9030-0x9037]
pci 0000:00:1f.2: reg 0x1c: [io 0x9020-0x9023]
pci 0000:00:1f.2: reg 0x20: [io 0x9000-0x901f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf200000-0xdf2007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x38fffff20000-0x38fffff200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f]
pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:2204] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0x8000-0x807f]
pci 0000:03:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: PME# supported from D0 D3hot
pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:03:00.1: [10de:1aef] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:02.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:05:00.0: reg 0x10: [mem 0x38ffffc00000-0x38ffffc03fff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0x38ffff800000-0x38ffffbfffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [io 0x7000-0x70ff]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: reg 0x164: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0007bfff 64bit pref] (contains BAR0 for 31 VFs)
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:11.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:11.0: bridge window [mem 0x38ffff800000-0x38ffffcfffff 64bit pref]
pci 0000:06:00.0: [8086:1521] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xdf160000-0xdf17ffff]
pci 0000:06:00.0: reg 0x18: [io 0x6060-0x607f]
pci 0000:06:00.0: reg 0x1c: [mem 0xdf18c000-0xdf18ffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:06:00.1: [8086:1521] type 00 class 0x020000
pci 0000:06:00.1: reg 0x10: [mem 0xdf140000-0xdf15ffff]
pci 0000:06:00.1: reg 0x18: [io 0x6040-0x605f]
pci 0000:06:00.1: reg 0x1c: [mem 0xdf188000-0xdf18bfff]
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:06:00.2: [8086:1521] type 00 class 0x020000
pci 0000:06:00.2: reg 0x10: [mem 0xdf120000-0xdf13ffff]
pci 0000:06:00.2: reg 0x18: [io 0x6020-0x603f]
pci 0000:06:00.2: reg 0x1c: [mem 0xdf184000-0xdf187fff]
pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:06:00.3: [8086:1521] type 00 class 0x020000
pci 0000:06:00.3: reg 0x10: [mem 0xdf100000-0xdf11ffff]
pci 0000:06:00.3: reg 0x18: [io 0x6000-0x601f]
pci 0000:06:00.3: reg 0x1c: [mem 0xdf180000-0xdf183fff]
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:06:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:06:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:00:1c.0: PCI bridge to [bus 06-07]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:08: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x38ffffffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:7f:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:7f:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:7f:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:7f:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:7f:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:7f:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:7f:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:7f:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:7f:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:7f:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:7f:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:7f: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug PME AER LTR DPC]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:80: root bus resource [mem 0x390000000000-0x39ffffffffff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:00.0: [8086:0e01] type 01 class 0x060400
pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.1: [8086:0e05] type 01 class 0x060400
pci 0000:80:02.1: PME# supported from D0 D3hot D3cold
pci 0000:80:02.2: [8086:0e06] type 01 class 0x060400
pci 0000:80:02.2: PME# supported from D0 D3hot D3cold
pci 0000:80:02.3: [8086:0e07] type 01 class 0x060400
pci 0000:80:02.3: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:80:03.0: enabling Extended Tags
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0x39fffff1c000-0x39fffff1ffff 64bit]
pci 0000:80:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0x39fffff18000-0x39fffff1bfff 64bit]
pci 0000:80:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0x39fffff14000-0x39fffff17fff 64bit]
pci 0000:80:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0x39fffff10000-0x39fffff13fff 64bit]
pci 0000:80:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0x39fffff0c000-0x39fffff0ffff 64bit]
pci 0000:80:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0x39fffff08000-0x39fffff0bfff 64bit]
pci 0000:80:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0x39fffff04000-0x39fffff07fff 64bit]
pci 0000:80:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0x39fffff00000-0x39fffff03fff 64bit]
pci 0000:80:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:80:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
pci 0000:80:00.0: PCI bridge to [bus 81]
pci 0000:82:00.0: [1102:7006] type 01 class 0x060400
pci 0000:82:00.0: supports D1 D2
pci 0000:80:01.0: PCI bridge to [bus 82-83]
pci 0000:80:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:83: extended config space not accessible
pci 0000:83:00.0: [1102:0009] type 00 class 0x040300
pci 0000:83:00.0: reg 0x10: [mem 0xfbe00000-0xfbe03fff]
pci 0000:83:00.0: supports D1 D2
pci 0000:82:00.0: PCI bridge to [bus 83]
pci 0000:82:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:84:00.0: [1c5c:1639] type 00 class 0x010802
pci 0000:84:00.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
pci 0000:84:00.0: reg 0x18: [mem 0xfbd05000-0xfbd05fff]
pci 0000:84:00.0: reg 0x1c: [mem 0xfbd04000-0xfbd04fff]
pci 0000:80:02.0: PCI bridge to [bus 84]
pci 0000:80:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:85:00.0: [1c5c:174a] type 00 class 0x010802
pci 0000:85:00.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:85:00.0: reg 0x18: [mem 0xfbc05000-0xfbc05fff]
pci 0000:85:00.0: reg 0x1c: [mem 0xfbc04000-0xfbc04fff]
pci 0000:80:02.1: PCI bridge to [bus 85]
pci 0000:80:02.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:80:02.2: PCI bridge to [bus 86]
pci 0000:80:02.3: PCI bridge to [bus 87]
pci 0000:80:03.0: PCI bridge to [bus 88]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:01: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 1
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 5
ACPI: PCI: Interrupt link LNKD configured for IRQ 3
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 7
iommu: Default domain type: Passthrough
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7de26000-0x7fffffff]
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: bridge control possible
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
pnp 00:03: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:05:00.0 BAR 7 [mem 0x00000000-0x0007bfff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.0 BAR 7 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.0 BAR 10 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.1 BAR 7 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.1 BAR 10 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.2 BAR 7 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.2 BAR 10 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.3 BAR 7 [mem 0x00000000-0x0001ffff 64bit pref]
pnp 00:03: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.3 BAR 10 [mem 0x00000000-0x0001ffff 64bit pref]
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0b00-0x0b7f] has been reserved
system 00:06: [io 0x0400-0x0453] has been reserved
system 00:06: [io 0x0458-0x047f] has been reserved
system 00:06: [io 0x1180-0x119f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:09: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, vmalloc)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, vmalloc)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-07] add_size 100000 add_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x380000000000-0x3800000fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:02.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:05:00.0: BAR 7: assigned [mem 0x38ffffc04000-0x38ffffc7ffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:11.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:11.0: bridge window [mem 0x38ffff800000-0x38ffffcfffff 64bit pref]
pci 0000:06:00.0: BAR 7: assigned [mem 0x380000000000-0x38000001ffff 64bit pref]
pci 0000:06:00.0: BAR 10: assigned [mem 0x380000020000-0x38000003ffff 64bit pref]
pci 0000:06:00.1: BAR 7: assigned [mem 0x380000040000-0x38000005ffff 64bit pref]
pci 0000:06:00.1: BAR 10: assigned [mem 0x380000060000-0x38000007ffff 64bit pref]
pci 0000:06:00.2: BAR 7: assigned [mem 0x380000080000-0x38000009ffff 64bit pref]
pci 0000:06:00.2: BAR 10: assigned [mem 0x3800000a0000-0x3800000bffff 64bit pref]
pci 0000:06:00.3: BAR 7: assigned [mem 0x3800000c0000-0x3800000dffff 64bit pref]
pci 0000:06:00.3: BAR 10: assigned [mem 0x3800000e0000-0x3800000fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06-07]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1c.0: bridge window [mem 0x380000000000-0x3800000fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 12 [mem 0x380000000000-0x38ffffffffff window]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:05: resource 2 [mem 0x38ffff800000-0x38ffffcfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:06: resource 2 [mem 0x380000000000-0x3800000fffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:08: resource 9 [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:08: resource 10 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:08: resource 11 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:08: resource 12 [mem 0x380000000000-0x38ffffffffff window]
pci 0000:80:00.0: PCI bridge to [bus 81]
pci 0000:82:00.0: PCI bridge to [bus 83]
pci 0000:82:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:80:01.0: PCI bridge to [bus 82-83]
pci 0000:80:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:80:02.0: PCI bridge to [bus 84]
pci 0000:80:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:80:02.1: PCI bridge to [bus 85]
pci 0000:80:02.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:80:02.2: PCI bridge to [bus 86]
pci 0000:80:02.3: PCI bridge to [bus 87]
pci 0000:80:03.0: PCI bridge to [bus 88]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:80: resource 6 [mem 0x390000000000-0x39ffffffffff window]
pci_bus 0000:82: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:83: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:84: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:85: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28]
pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
pci 0000:80:05.0: disabled boot interrupts on device [8086:0e28]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000079e26000-0x000000007de26000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=26 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 27908K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.SCK0.C002: Found 1 idle states
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf200000 port 0xdf200100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xdf200000 port 0xdf200180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xdf200000 port 0xdf200200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xdf200000 port 0xdf200280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xdf200000 port 0xdf200300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xdf200000 port 0xdf200380 irq 42
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2022-08-13T07:54:50 UTC (1660377290)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x00000000700f0a95, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
microcode: sig=0x306e4, pf=0x1, revision=0x42e
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1623932943, 822956)->(1671504158, -46748259)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: lzo
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
ata3.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
ata2.00: ATA-11: WDC WDS200T2B0B, X61190WD, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata4.00: NCQ Send/Recv Log not supported
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
ata3.00: configured for UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: Features: Dev-Sleep
ata4.00: NCQ Send/Recv Log not supported
ata4.00: configured for UDMA/133
ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
ata2.00: configured for UDMA/133
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WDS200T2B0B 90WD PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
scsi 3:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
PM: Magic number: 2:620:925
clockevents clockevent18: hash matches
pci 0000:ff:0c.0: hash matches
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2912K
Write protecting the kernel read-only data: 28672k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1192K
Run /init as init process
with arguments:
/init
showopts
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.19.0-1-default
splash=silent
systemd[1]: systemd 251.2+suse.21.ge9fc337d97 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Hostname set to .
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Reached target Initrd /usr File System.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Timer Units.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Socket Units.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
systemd[1]: Started Journal Service.
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
tsc: Refined TSC clocksource calibration: 3299.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f914bc4411, max_idle_ns: 440795317975 ns
clocksource: Switched to clocksource tsc
raid6: sse2x4 gen() 14374 MB/s
raid6: sse2x2 gen() 9150 MB/s
raid6: sse2x1 gen() 9112 MB/s
raid6: using algorithm sse2x4 gen() 14374 MB/s
raid6: .... xor() 8982 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, assert=on, zoned=yes, fsverity=yes
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cryptd: max_cpu_qlen set to 1000
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
isci 0000:05:00.0: driver configured for rev: 6 silicon
isci 0000:05:00.0: OEM SAS parameters (version: 1.3) loaded (firmware)
nvme nvme0: pci function 0000:84:00.0
AVX version of gcm_enc/dec engaged.
nvme nvme1: pci function 0000:85:00.0
AES CTR mode by8 optimization enabled
isci 0000:05:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi host6: isci
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
nvme nvme0: missing or invalid SUBNQN field.
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf202000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.19.0-1-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf201000
nvme nvme1: 32/0/0 default/read/poll queues
nvme nvme1: Ignoring bogus Namespace Identifiers
nvme1n1: p1
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.19.0-1-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
BTRFS: device fsid 5a0da036-13c0-480c-8705-22f770de9941 devid 1 transid 410784 /dev/sda1 scanned by systemd-udevd (585)
nvme nvme0: 16/0/0 default/read/poll queues
nvme0n1: p1
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
BTRFS info (device sda1): flagging fs with big metadata feature
BTRFS info (device sda1): disk space caching is enabled
BTRFS info (device sda1): has skinny extents
BTRFS info (device sda1): enabling ssd optimizations
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB2.1 Hub
usb 2-1.1: Manufacturer: GenesysLogic
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 4 ports detected
systemd-journald[437]: Received SIGTERM from PID 1 (systemd).
systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
systemd[1]: systemd 251.2+suse.21.ge9fc337d97 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
usb 2-1.1.1: new full-speed USB device number 4 using ehci-pci
systemd-sysv-generator[822]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory
systemd-sysv-generator[822]: SysV service '/etc/init.d/vmware' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
usb 2-1.1.1: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.00
usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.1: Product: G513 Carbon Tactile
usb 2-1.1.1: Manufacturer: Logitech
usb 2-1.1.1: SerialNumber: 087B38663437
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Forward Password Requests to Plymouth Directory Watch was skipped because of a failed condition check (ConditionPathExists=/run/plymouth/pid).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
usb 2-1.1.2: new full-speed USB device number 5 using ehci-pci
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Stopped Journal Service.
systemd[1]: Stopping Entropy Daemon based on the HAVEGE algorithm...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: haveged.service: Deactivated successfully.
systemd[1]: Stopped Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Starting Journal Service...
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Apply Kernel Variables for 5.19.0-1-default from /boot was skipped because of a failed condition check (ConditionPathExists=!/usr/lib/modules/5.19.0-1-default/sysctl.conf).
BTRFS info (device sda1: state M): disk space caching is enabled
systemd[1]: Starting Apply Kernel Variables for 5.19.0-1-default...
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: One time configuration for iscsid.service was skipped because of a failed condition check (ConditionPathExists=!/etc/iscsi/initiatorname.iscsi).
systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
fuse: init (API version 7.36)
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Apply Kernel Variables for 5.19.0-1-default.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
usb 2-1.1.2: New USB device found, idVendor=046d, idProduct=c24a, bcdDevice=77.02
usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.2: Product: Gaming Mouse G600
usb 2-1.1.2: Manufacturer: Logitech
usb 2-1.1.2: SerialNumber: C913BF5AE3D60017
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 5.00
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
input: PC Speaker as /devices/platform/pcspkr/input/input2
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 8/24 memory slots populated (from DMI)
i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
usb 2-1.1.3: new full-speed USB device number 6 using ehci-pci
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
igb 0000:06:00.0: DCA enabled
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:32:2b:74
igb 0000:06:00.0: eth0: PBA No: 105900-000
igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:06:00.1: DCA enabled
igb 0000:06:00.1: added PHC on eth1
igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:32:2b:75
igb 0000:06:00.1: eth1: PBA No: 105900-000
igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:06:00.2: DCA enabled
igb 0000:06:00.2: added PHC on eth2
igb 0000:06:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:32:2b:76
igb 0000:06:00.2: eth2: PBA No: 105900-000
igb 0000:06:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
systemd-journald[842]: Received client request to flush runtime journal.
usb 2-1.1.3: config 1 has an invalid interface number: 3 but max is 2
usb 2-1.1.3: config 1 has no interface number 1
usb 2-1.1.3: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.3: Product: Usb Audio Device
usb 2-1.1.3: Manufacturer: Generalplus
usb 2-1.1.3: SerialNumber: 13662631792
igb 0000:06:00.3: DCA enabled
igb 0000:06:00.3: added PHC on eth3
igb 0000:06:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:32:2b:77
igb 0000:06:00.3: eth3: PBA No: 105900-000
igb 0000:06:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
audit: type=1400 audit(1660388093.968:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1010 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1003 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1003 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=1013 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1015 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1001 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/updatedb" pid=1016 comm="apparmor_parser"
audit: type=1400 audit(1660388093.972:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-anvil" pid=1018 comm="apparmor_parser"
audit: type=1400 audit(1660388093.980:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1002 comm="apparmor_parser"
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 515.65.01 Wed Jul 20 14:00:58 UTC 2022
usb 2-1.1.4: new high-speed USB device number 7 using ehci-pci
igb 0000:06:00.0 eno1: renamed from eth0
nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
XFS (sda2): Mounting V5 Filesystem
nvidia-uvm: Loaded the UVM driver, major device number 238.
XFS (sda2): Ending clean mount
xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
iTCO_vendor_support: vendor-support=0
igb 0000:06:00.2 eno3: renamed from eth2
igb 0000:06:00.1 eno2: renamed from eth1
iTCO_wdt iTCO_wdt.1.auto: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Quota mode: none.
snd_hda_intel 0000:83:00.0: CORB reset timeout#1, CORBRP = 0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 515.65.01 Wed Jul 20 13:43:59 UTC 2022
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Ivy Bridge SrcID#1_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
EXT4-fs (nvme1n1p1): mounted filesystem with ordered data mode. Quota mode: none.
igb 0000:06:00.3 eno4: renamed from eth3
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input3
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input4
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input5
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input8
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input9
[drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
snd_hda_codec_ca0110 hdaudioC1D1: autoconfig for CA0110-IBG: line_outs=4 (0xb/0xd/0xc/0xe/0x0) type:line
snd_hda_codec_ca0110 hdaudioC1D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0110 hdaudioC1D1: hp_outs=1 (0xf/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0110 hdaudioC1D1: mono: mono_out=0x0
snd_hda_codec_ca0110 hdaudioC1D1: dig-out=0x12/0x0
snd_hda_codec_ca0110 hdaudioC1D1: inputs:
snd_hda_codec_ca0110 hdaudioC1D1: Mic=0x11
snd_hda_codec_ca0110 hdaudioC1D1: Line=0x10
snd_hda_codec_ca0110 hdaudioC1D1: dig-in=0x13
input: HDA Creative Mic as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input10
input: HDA Creative Line as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input11
input: HDA Creative Line Out Front as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input12
input: HDA Creative Line Out Surround as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input13
input: HDA Creative Line Out CLFE as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input14
input: HDA Creative Line Out Side as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input15
input: HDA Creative Front Headphone as /devices/pci0000:80/0000:80:01.0/0000:82:00.0/0000:83:00.0/sound/card1/input16
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
msr: Write to unrecognized MSR 0x17f by mcelog (pid: 1605).
msr: See for details.
NET: Registered PF_QIPCRTR protocol family
bpfilter: Loaded bpfilter_umh pid 1658
Started bpfilter
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0
openvswitch: Open vSwitch switching datapath
usb 2-1.1.4: New USB device found, idVendor=046d, idProduct=085b, bcdDevice= 0.16
usb 2-1.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 2-1.1.4: Product: Logitech Webcam C925e
usb 2-1.1.4: SerialNumber: AAC3D7DF
mc: Linux media interface: v0.10
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
videodev: Linux video capture interface: v2.00
input: Logitech G513 Carbon Tactile as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:046D:C33C.0001/input/input17
hid-generic 0003:046D:C33C.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0000:00:1d.0-1.1.1/input0
input: Logitech G513 Carbon Tactile Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/0003:046D:C33C.0002/input/input18
hid-generic 0003:046D:C33C.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0000:00:1d.0-1.1.1/input1
input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/0003:046D:C24A.0003/input/input21
usbcore: registered new interface driver snd-usb-audio
usb 2-1.1.4: Found UVC 1.00 device Logitech Webcam C925e (046d:085b)
input: Logitech Webcam C925e as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input22
hid-generic 0003:046D:C24A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1d.0-1.1.2/input0
usbcore: registered new interface driver uvcvideo
input: Logitech Gaming Mouse G600 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.1/0003:046D:C24A.0004/input/input23
input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.1/0003:046D:C24A.0004/input/input24
hid-generic 0003:046D:C24A.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1d.0-1.1.2/input1
input: Generalplus Usb Audio Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.3/0003:1B3F:2008.0005/input/input25
hid-generic 0003:1B3F:2008.0005: input,hidraw4: USB HID v2.01 Device [Generalplus Usb Audio Device] on usb-0000:00:1d.0-1.1.3/input3
Initializing XFRM netlink socket
NET: Registered PF_PACKET protocol family
igb 0000:06:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and for details.
rfkill: input handler disabled
usb 2-1.1.4: reset high-speed USB device number 7 using ehci-pci
sched: RT throttling activated
/dev/vmmon[4802]: Module vmmon: registered as misc device
/dev/vmmon[4802]: Using tsc_khz as TSC frequency: 3299999
/dev/vmmon[4802]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=123)
Initialized host personality
NET: Registered PF_VSOCK protocol family
ppdev: user-space parallel port driver
userif-3: sent link down event.
userif-3: sent link up event.
rfkill: input handler enabled
rfkill: input handler disabled
[drm:drm_new_set_master] *ERROR* [nvidia-drm] [GPU ID 0x00000300] Failed to grab modeset ownership
[drm:drm_new_set_master] *ERROR* [nvidia-drm] [GPU ID 0x00000300] Failed to grab modeset ownership
i2c_dev: i2c /dev entries driver
systemd-sysv-generator[7336]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory
systemd-sysv-generator[7336]: SysV service '/etc/init.d/vmware' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[drm:drm_new_set_master] *ERROR* [nvidia-drm] [GPU ID 0x00000300] Failed to grab modeset ownership
systemd-sysv-generator[9537]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory
systemd-sysv-generator[9537]: SysV service '/etc/init.d/vmware' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[drm:drm_new_set_master] *ERROR* [nvidia-drm] [GPU ID 0x00000300] Failed to grab modeset ownership
show_signal_msg: 60 callbacks suppressed
firefox[15405]: segfault at d8 ip 00007fde0a59c020 sp 00007ffeb6cd00a8 error 4 in libX11.so.6.4.0[7fde0a58a000+8c000]
Code: 2e 0f 1f 84 00 00 00 00 00 90 8b 47 1c c3 66 66 2e 0f 1f 84 00 00 00 00 00 90 8b 47 74 c3 66 66 2e 0f 1f 84 00 00 00 00 00 90 8b 87 d8 00 00 00 c3 0f 1f 84 00 00 00 00 00 48 63 f6 48 c1 e6
steam[12213]: segfault at 0 ip 0000000000000000 sp 00000000ff9e09ac error 14 in steam[565aa000+5df000]
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.